Can it take the pressure?
#1
Teching In
Thread Starter
Join Date: Jan 2005
Location: Thousand Oaks, CA.
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Can it take the pressure?
I bought a MSD external pump rated at 120 psi. It has a barb type fitting on the pressure side. Is there any hose and clamp anyone would trust to stay on there and not spew gas? I cut the hard line going up to fuel rail. I did a flare on the line and will connect there with other end of hose from the pump. I was going to use braided line with some non-stripping clamps, but now I am having second thoughts. I would like to keep this pump since I already bought it and have it mounted. But I don't want to burn up my truck either. Any suggestions?
#3
Teching In
Thread Starter
Join Date: Jan 2005
Location: Thousand Oaks, CA.
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTS346
Your not going to run 120psi though, are you?