Changing Injectors, Any Tips?
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Nov 2001
Posts: 1,493
Likes: 0
From: Chesapeake, VA
Changing Injectors, Any Tips? Just like the title says, I am upgrading my stockers to SVO 30#ers. Any special advice or tips? Any special tools needed? Thanks! Ben
It is a easy swap. Few tips, disconnect the wire harness at the 4 corners, us a long screwdriver to unclip. Removing the connectors for the rear injectors is a pain, but if you disconnect front 6 1st and then pull rail up and forward you will be able to disconnect the rear injtcs. Be cautious orings will probaly stick up in the rail use a small pick to pull them out. When reinstalling use a small bit of vasloline onthe orings. Do not need to disconnect main fuel supply line.
You might want to go with a bigger injector for further mods down the road. 30#,s seem a little small if you have bigger plans. Going to have to tune for them anyway. Save yourself some time and money.
You might want to go with a bigger injector for further mods down the road. 30#,s seem a little small if you have bigger plans. Going to have to tune for them anyway. Save yourself some time and money.
Last edited by 618HAWK; Jul 5, 2005 at 08:04 PM.
you don't need to disconnect the fuel line at all...
Just follow this write up:
https://ls1tech.com/forums/fueling-injection/338660-svo-42-s-installed.html
Just follow this write up:
https://ls1tech.com/forums/fueling-injection/338660-svo-42-s-installed.html
