Nasty N8 Tank problems.
Nasty N8 Tank problems. I pulled the factory steel tank out of my 98 Z28 today with little problem. I am stuck now as to reinstalling the Nasty N8 tank. I know my tank is okay to use the stock sending unit. No biggies there. Do I need to remove the factory pump though? I am using a external A-1000 setup. Also what about the filler neck for the Nasty tank. What am I supposed to use? Any idea's or help is greatly appreciated.
Here are some pics for reference:
Here are some pics for reference:
Okya it looks like I will be running a 99+ filler neck with rubber coupling to the Nast N8 tank. Gonna cost me about $40 total to do it.
Now what about tkeeping the factory sending unit my tank is setup for and ditching the factory pump?
Now what about tkeeping the factory sending unit my tank is setup for and ditching the factory pump?
Have not decided yet. My tank doesnt have bungs for it to mount on the tank. I will probably find a place to mount it down from the tank. I have mounted several on the frame rails when I was building mustangs. I have some options. I just have to figure out which one to go with.
Trending Topics
I am gonna use a factory 99 model filler neck and use rubber hose to connect the two together. I managed to pull all my factory fuel lines out between thunder storms today. I just have to get the tank mounted and start installing the aeroquip lines and such.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by wickedred
I am gonna use a factory 99 model filler neck and use rubber hose to connect the two together. I managed to pull all my factory fuel lines out between thunder storms today. I just have to get the tank mounted and start installing the aeroquip lines and such.
Originally Posted by JMBLOWNWS6
I had to use the filler neck from a Honda 
Yes a honda I couldnt get my stock filler neck to reach!
Yes a honda I couldnt get my stock filler neck to reach!A buddy of mine got it and had the issue. I don't see how anyone else's experience can possibly be different... I mean, look at that lil filler neck. The tank looks very nice though.
Some have needed an extra couple inches we have added a longer spout on the new ones. But all you need is a chunk of 1" hose to reach your stock filler. Local parts store will have some.
Nate
Nate
Originally Posted by Nasty N8
Some have needed an extra couple inches we have added a longer spout on the new ones. But all you need is a chunk of 1" hose to reach your stock filler. Local parts store will have some.
Nate
Nate
Last edited by JMBLOWNWS6; May 31, 2006 at 05:24 PM.
