Walbro Dual Intank Link ???
Thread Starter
10 Second Club
iTrader: (22)
Joined: Dec 2003
Posts: 1,182
Likes: 0
From: Macomb Michigan
Walbro Dual Intank Link ??? Is there a link to show how to convert your single Walbro to a Dual setup.
I'm having fuel issues and need to install another one. Right now I see 60 psi on the gauge. When I put it to the floor it drops down to 48-52 psi instanly.
Thanks for the help
I'm having fuel issues and need to install another one. Right now I see 60 psi on the gauge. When I put it to the floor it drops down to 48-52 psi instanly.
Thanks for the help
zero, the hot wire kit is a waste, it takes voltage to 14 volts at WOT and boost pump volume like 5%-10% maybe. boostapump is the way to go, boosting the voltage to 18 volts, and its boost referenced, whplash I get those pics out asap
Originally Posted by MIGHTYMOUSE
make sure it is not just a bad regulator
you could also try an inline or a volt booster for a few bux.
i'm not a fan of hacking the bucket on the plastic tank cars
you could also try an inline or a volt booster for a few bux.
i'm not a fan of hacking the bucket on the plastic tank cars
would you do it to a metal tank that's in the 98's?
