Help Imput Please!?!?!?!?!
Help Imput Please!?!?!?!?! ok here is my dilema.
I have ann LS1 in an S10 pickup. I am using a friedns fuel rail..so I can use -6AN line to the FPR then the the fuel rail. now. my stock fuel lines end right under the drivers seat(return/feed). is there an adaptor that makes it so I can attach the -6AN line directly to the stock metal fuel lines?
any imput would be most helpful, any ideas? I am kinda lost when it comes to fuel systems....and I dont want to run the -6AN all the way back to the fuel tank, and swap out the pumps, and do this and that. is there a fitting that will allow me to just tie the -6 directly to the metal line?
I have ann LS1 in an S10 pickup. I am using a friedns fuel rail..so I can use -6AN line to the FPR then the the fuel rail. now. my stock fuel lines end right under the drivers seat(return/feed). is there an adaptor that makes it so I can attach the -6AN line directly to the stock metal fuel lines?
any imput would be most helpful, any ideas? I am kinda lost when it comes to fuel systems....and I dont want to run the -6AN all the way back to the fuel tank, and swap out the pumps, and do this and that. is there a fitting that will allow me to just tie the -6 directly to the metal line?
TECH Enthusiast
Joined: Jul 2006
Posts: 638
Likes: 0
From: San Diego
Originally Posted by GTP PWR
ok here is my dilema.
I have ann LS1 in an S10 pickup. I am using a friedns fuel rail..so I can use -6AN line to the FPR then the the fuel rail. now. my stock fuel lines end right under the drivers seat(return/feed). is there an adaptor that makes it so I can attach the -6AN line directly to the stock metal fuel lines?
any imput would be most helpful, any ideas? I am kinda lost when it comes to fuel systems....and I dont want to run the -6AN all the way back to the fuel tank, and swap out the pumps, and do this and that. is there a fitting that will allow me to just tie the -6 directly to the metal line?
I have ann LS1 in an S10 pickup. I am using a friedns fuel rail..so I can use -6AN line to the FPR then the the fuel rail. now. my stock fuel lines end right under the drivers seat(return/feed). is there an adaptor that makes it so I can attach the -6AN line directly to the stock metal fuel lines?
any imput would be most helpful, any ideas? I am kinda lost when it comes to fuel systems....and I dont want to run the -6AN all the way back to the fuel tank, and swap out the pumps, and do this and that. is there a fitting that will allow me to just tie the -6 directly to the metal line?
