dropping tank
Thread Starter
Joined: Jun 2005
Posts: 4,641
Likes: 392
From: cookeville, TN
dropping tank ok the hole fuel pump access plate is a great idea but i cant find any how toos on dropping the tank. my car is up in the air so i can stand under it the tank is less than a quarter full, lines disconntected and the wires unplugged
i unbolted the 2 straps yet the tank would still not drop is there some mounting hardware i missed. i cant find a how to i tried searching and all i could find was the trap door thing. so anyone experienced that can offer some insight that would be awsome
i unbolted the 2 straps yet the tank would still not drop is there some mounting hardware i missed. i cant find a how to i tried searching and all i could find was the trap door thing. so anyone experienced that can offer some insight that would be awsome
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
Need to unbolt the filler neck as well. There are 2 or 3 screws under the gas filler lid and there is a 10mm bolt behind a peice of plastic in the wheel well. That should do it.
take out the upper panhard bar, unscrew the filler neck from under the wheelwell, unbolt the two screws from under the gas lid. unbolt the 2 bolts in the straps holding the tank, undo the lines to the tank, pull the tank out. make sure there is less than a 1/4 tank of gas in there otherwise it gets heavy.
