Will 42#'s be enough?
Will 42#'s be enough? So I'm getting the parts togeather for a H/C swap and a plate from Dave and decided to do the fuel at the same time, duh. The question is will the 42# green tops be big enough? I'd use the injector calculator but I dont know what the fuel demands will be for those parts.
Heres what is going in as far as power parts:
AFR 205's, not milled
230's/240's .590's/.590's 112LSA cam
90mm plate system from Dave spraying a wet 150
I'm looking to get a "Stage 1 Street kit-up to 700hp (600rwhp)" from Nasty Performance. I'd go with a stand alone for the NO2 but just don't have the cash for it after buying a new 9" and clutch.
Thanks ya'll
Eric
Heres what is going in as far as power parts:
AFR 205's, not milled
230's/240's .590's/.590's 112LSA cam
90mm plate system from Dave spraying a wet 150
I'm looking to get a "Stage 1 Street kit-up to 700hp (600rwhp)" from Nasty Performance. I'd go with a stand alone for the NO2 but just don't have the cash for it after buying a new 9" and clutch.
Thanks ya'll
Eric
If you're going with a wet kit, the 42's will be plenty and have some room to grow if you up the cubes. If you have to buy injectors.....I'd buy 60 Mototrons since they are as easy to tune as the 42's....if you have 42's or a "real deal" on 42's....then 42's will be more than enough.
