fuel line sizes
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
actually, a 3/8" is a -6
I used -6 braided lines for both...
you do know that the LS1 f-bodies don't have a dedicated return line tho right? You can use the EVAP as a return if you want. It is a 5/16
I used -6 braided lines for both...
you do know that the LS1 f-bodies don't have a dedicated return line tho right? You can use the EVAP as a return if you want. It is a 5/16
The EVAP system in a nutshell is a system that drawns fuel vapor and overpressure from the fuel tank and puts into the intake manifold. Removing or disassembling the EVAP will throw codes and is consider an emissions piece of equipment.
Keith
Keith
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
You will need to have the codes turned off if you plan on doing that way. I did a half *** writeup of how I did mine.
https://ls1tech.com/forums/fueling-injection/698950-does-anyone-have-write-up.html
https://ls1tech.com/forums/fueling-injection/698950-does-anyone-have-write-up.html
