Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

fuel problems with walbro 255

Thread Tools
 
Search this Thread
 
Old 09-12-2007, 03:31 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
redlinec's Avatar
 
Join Date: Dec 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Question fuel problems with walbro 255

ok i have a 98 ls1 with a vortech blower. i just installed a intank walbro255 fuel pump and it hardly runs, stalls out some, undriveable. but if i disconnect the maf it will run,drive down the road untill i go full throttle then the car boggs down and just will not go. i dont no if this is part of the problem but when i shut of the car my fuel pressure drops to 0.

the car ran fine before adding the new big fuel pump any help???
Old 09-13-2007, 07:02 PM
  #2  
Teching In
Thread Starter
iTrader: (1)
 
redlinec's Avatar
 
Join Date: Dec 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

ok my car is not running its a 98 ls1 with 10# boost vortech and just installed a intank pump 255 lph. now the car will not run just spits and spudders. it will rev up ok in the drive way but will die out when i go to drive it just move it...and will not hold fuel pressure when car is shut off. when i turn the key on fuel pressure is at 20psi then start up 30 psi then rev up 31 psi thats getting in to boost any help?




All times are GMT -5. The time now is 05:50 AM.