Injector driver install ? on LS-6
Injector driver install ? on LS-6 I just installed a AEM low impedance injector driver and attempted to run the car with a stock tune and the stock high impedance injectors. It is running like ****, rich and popping out the exhaust. Is this normal for this set up. FYI- The reason I installed it this way was to hopefully limit any gremlins, by doing 1 thing at a time before swapping in my new motor and larger low impedance injectors. 
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
At a guess, you risk damaging the injector drivers by running the wrong type of injector.
The way you have done it is more likely to increase the risk of problems....as you are discovering.
Racetronix do a nice plug n play harness you could have used. This would allowed you to have done the fitting etc....and when the time comes to tune, just swap the plugs over to fire up the low impedance driver.
The way you have done it is more likely to increase the risk of problems....as you are discovering.
Racetronix do a nice plug n play harness you could have used. This would allowed you to have done the fitting etc....and when the time comes to tune, just swap the plugs over to fire up the low impedance driver.
