I just changed my injectors to the FAST 36# ers.I read that the stock injector size for my 99 Ta was 26.4.I am going to change my flow rate table so I would appreciate if someone could either verify or correct me on this. Thanks

 

Those are the same injectors used in the ASA motors. Here are the injector tables for those injectors. I exported these tables in HP Tuners.

http://www.andersonperformance.net/3...tinjectors.zip

 

406, could I add your Inj offset table to my web info, and would give author credit. Maybe if ya get a chance read over my injector scaling write up and see if there are any mistakes or corrections needed, I think your info would be a valuable addition, and maybe you could write an intro on your info?
Thanks
Robert

 

Robert,
I can't take credit for those tables, they are not mine. I 'took' them from GM, so if credit is due it's GM that deserves the credit. If you would like to post them on your website, I say go for it. If it helps someone better tune their car than it's worth it.

I quickly glanced at your website, but don't have time at the moment to really commit to it. I will read it more closely over the next week and email or PM.

Happy motoring!