Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

Quick fuel pump sender wiring question...

Thread Tools
 
Search this Thread
 
Old Apr 8, 2008 | 06:16 PM
  #1  
Craig91's Avatar
Thread Starter
Teching In
 
Joined: Jul 2005
Posts: 24
Likes: 0
From: CT
Default Quick fuel pump sender wiring question...

My pump recently went out and I'm replacing it with the Racetronix pump...however...

When my friend and I were removing the purple wires from the connector, we forgot to make note of which wire was where on the connector.

Does anyone know if the "full" wire is supposed to be next to the gray wire or the black wire? Or if the "empty" wire is next to the gray or black. We figured it would make a difference and by the time we realized it, it was too late.

Thanks in advance! I can't wait to get my car back together as the next couple days are supposed to be very nice here and I'd like to just go out and drive.
Reply
Old Apr 9, 2008 | 11:16 AM
  #2  
azceta's Avatar
11 Second Club
15 Year Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 94
Likes: 0
From: Austin TX
Default

which connector? one located on the body near the diff. I'll try to get a pic up here in a few
Reply
Old Apr 9, 2008 | 06:30 PM
  #3  
Lonnies Performance's Avatar
LS1TECH Sponsor
iTrader: (16)
 
Joined: Feb 2007
Posts: 2,662
Likes: 2
From: Pittsburgh, PA
Default

If it is a 99 up there are 2 purple wires. You can install them in either opening, they do not matter.
Reply




All times are GMT -5. The time now is 02:13 AM.