Do I have A problem with 9-inch housing
05-20-2009, 09:01 PM
#1
12 Second Club
Thread Starter
Join Date: Jan 2006
Location: Ohio
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Do I have A problem with 9-inch housing I have the third member out and was looking at my splines on my axles.
There seems to be some wear on the splines. This is A moser with 35 spline
axle's and A moser spool. This has 2500 miles 40 track passes. Is the wear from the spool and street driving or do I need to have housing straightened.
housing has back brace, relocation brackets, swaybar brackets all welded on.
I don't want to take it back out but this rear has never been quiet. I had A moser allum. center and now i'm building a pro iron case and want it quiet
There seems to be some wear on the splines. This is A moser with 35 spline
axle's and A moser spool. This has 2500 miles 40 track passes. Is the wear from the spool and street driving or do I need to have housing straightened.
housing has back brace, relocation brackets, swaybar brackets all welded on.
I don't want to take it back out but this rear has never been quiet. I had A moser allum. center and now i'm building a pro iron case and want it quiet
