How much to cut off my rear
How much to cut off my rear I just got weld rodlites with 5.5 inch backspacing. I will be purchasing my rear next. How much to I need to cut off each side of the rear? Is every car the same or do I physically have to take down my stock 10 bolt and place the wheels under the car and pull a measurement? Also, Im assuming it will be the same whether I buy a 9 inch or a S60 right?
From what I have seen most people do 3" per side for that setup.
Take from the Drag race section:
"I recently had Madman & Company Racing minitub my 02 SS I had my Moser 9" narrowed 3" per side and I now run a full set of Billet Specialties 15x10 Rears with a 5.5" B.S. with 325 M/T-DR's
The 4.5" B.S. wheels would still hit the Offset LCA's. I also run
Strange Race Brakes. I can drop the car as far down as I like
without any problem. Also,... I am NOT running any spacers.
Here are a couple of pics."
Take from the Drag race section:
"I recently had Madman & Company Racing minitub my 02 SS I had my Moser 9" narrowed 3" per side and I now run a full set of Billet Specialties 15x10 Rears with a 5.5" B.S. with 325 M/T-DR's
The 4.5" B.S. wheels would still hit the Offset LCA's. I also run
Strange Race Brakes. I can drop the car as far down as I like
without any problem. Also,... I am NOT running any spacers.
Here are a couple of pics."
Mine was narrowed one inch per side and I had 15 x 10 Welds with a 6.50 backspace. The 325/50R15 M/T drag radials were perfectly centered. Here is a link to pictures of it. http://www.exoticperformanceplus.com...Car.php?car=12 Bob
