Need Help Quick
Thread Starter
Staging Lane
Joined: Jul 2009
Posts: 67
Likes: 0
Need Help Quick Ok, I had to change the rear passengers side axle seal so I figured I’d go ahead and do the driver’s side while I had everything apart. I got the passenger’s side done no problems once I got to the driver’s side I noticed the wheel bearing was broken so I pulled the seal and the broken bearing out but the housing or sleeve what ever you want to call it stayed in. 
I went and bought a whole new unit and now I can’t get the damn sleeve out. Does anyone know how to do this?? What’s the trick?? Is there a special tool I’m supposed to have??
Thanks Yall
I went and bought a whole new unit and now I can’t get the damn sleeve out. Does anyone know how to do this?? What’s the trick?? Is there a special tool I’m supposed to have??Thanks Yall
If I understand your problem, the outer race is stuck in the housing if so go to the local parts house and rent a" bearing slide hammer puller", if all else failes you may have to stick a long pipe in from the other side and drive it out ( you MAY have to pull the 3 rd memder to stick the pipe threw )
just my .02'
Johnny
just my .02'
Johnny
