What is most can narrow a 9" before bracket issues?
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: Beaumont, TX USA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
What is most can narrow a 9" before bracket issues?
Going to get a 9" from Moser, have been doing a little research and see a lot with the rear go 3" narrow. What is most can narrow on each side before issues with brackets and frame and brakes come up? Thanks.
#2
LS1Tech Premium Sponsor
iTrader: (26)
usually about -3 per side is as much you can go with a Moser housing. Our housing can go -4.5, and then -5.5 with narrowed brackets.
Give us a call when you are ready to buy a rearend. We are direct dealers for Strange, Moser, and manufacture the ever popular MWC 9 inch fabricated rearends and have the best pricing guaranteed on any rearend combination for your f-body car.
Give us a call when you are ready to buy a rearend. We are direct dealers for Strange, Moser, and manufacture the ever popular MWC 9 inch fabricated rearends and have the best pricing guaranteed on any rearend combination for your f-body car.
#3
LS1Tech Sponsor
iTrader: (16)
http://shop.brutespeed.com/Complete-Rear-Ends_c1106.htm
You'll notice I have the available widths as an option. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#4
LS1Tech Premium Sponsor
iTrader: (5)
All though doing a narrowed LCA bracket is not that big of a pain as we can get you into a set of LCA'S with the correct offset bushing for the chassis and rear end side.
Keep in mind narrowing the housing past a certain point will also mean you will have to get into mini tubs to get the correct back spacing for your wheel fitment. It all plays together.