Need help finding a new Diff for Moser 12 bolt
Thread Starter
Joined: May 2005
Posts: 9,830
Likes: 2
From: Wallingford CT
Need help finding a new Diff for Moser 12 bolt Hey everyone.
I have a Moser 12 bolt with a Tru-Crap diff and I am getting to the point that I want to throw a limited slip back in the car. The diff acts like a spool currently and had the tire wear to prove it.
The rear has 33 Splined Axles and the upgraded diff cover and currently 4.10's and I MAY go to 4.30's during the swap.
Having searched on a few sponsor sites I for the life of me cannot find part # or prices for a the Eaton Diff that they originally offered back like 4 years ago.
I am not interested in a Wavetrac, nor a Spool, as well as a Detroit Locker as it's a m6 car with at this time, limited track use.
I need Part #'s, and prices for a install kit, diff, and options.
Also the current diff is a Tru Trac, I had heard that there were issues on how the axles were cut for the Tru Trac vs the Eaton. ANYONE ever run into this problem. I do need that verified.
Thanks!
I have a Moser 12 bolt with a Tru-Crap diff and I am getting to the point that I want to throw a limited slip back in the car. The diff acts like a spool currently and had the tire wear to prove it.
The rear has 33 Splined Axles and the upgraded diff cover and currently 4.10's and I MAY go to 4.30's during the swap.
Having searched on a few sponsor sites I for the life of me cannot find part # or prices for a the Eaton Diff that they originally offered back like 4 years ago.
I am not interested in a Wavetrac, nor a Spool, as well as a Detroit Locker as it's a m6 car with at this time, limited track use.
I need Part #'s, and prices for a install kit, diff, and options.
Also the current diff is a Tru Trac, I had heard that there were issues on how the axles were cut for the Tru Trac vs the Eaton. ANYONE ever run into this problem. I do need that verified.
Thanks!
http://shop.brutespeed.com/Moser-SE1...er-SE12334.htm
http://shop.brutespeed.com/Moser-R12...Moser-R12B.htm
I sell the parts at the above links, but I'm not sure off hand if you'll have to grind down your axles to make the Eaton differential fit. Bob
http://shop.brutespeed.com/Moser-R12...Moser-R12B.htm
I sell the parts at the above links, but I'm not sure off hand if you'll have to grind down your axles to make the Eaton differential fit. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
