Spicer U-Joint Part # Help!
Spicer U-Joint Part # Help! I've been through the searches but keep coming up with different answers.
I'm going to order them on ebay for around 18 bucks a pop shipped.
Are they the safe front and rear? And what is the part number.
Auto 98 ls1, factory drive shaft.
Thanks!
I'm going to order them on ebay for around 18 bucks a pop shipped.
Are they the safe front and rear? And what is the part number.
Auto 98 ls1, factory drive shaft.
Thanks!
i have been wondering the same. i cant find the spicer's locally, and want the sealed ones. im going to be using the ls1 alum driveshaft and the lt1 auto yoke. i cant seem to find the correct part number anywhere. help on this is appreciated
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Trending Topics
Restricted User
Joined: Sep 2010
Posts: 233
Likes: 1
From: Long Island, NY
So doing something SMART is stupid.
Did you not read what the op said.
People like you have problems.
It would be the smartest thing that could be done.
The idea of these forums are to help, make something easier and have definitive answers.
Not umpteen posts with misinformation and then in those posts 1 right answer and several guesses.
If this particular topic was a FAQ this poster could have opened it and had relief rather than hope someone answered it correctly. Pay attention to the time he had to wait for that answer, what if he was renting a lift ?
Which i see you missed that point also.
That answer was from another member with the same question.
Just proving my point there mr. day late, so again, this topic should be made a FAQ
.
Did you not read what the op said.
I've been through the searches but keep coming up with different answers.
It would be the smartest thing that could be done.
The idea of these forums are to help, make something easier and have definitive answers.
Not umpteen posts with misinformation and then in those posts 1 right answer and several guesses.
If this particular topic was a FAQ this poster could have opened it and had relief rather than hope someone answered it correctly. Pay attention to the time he had to wait for that answer, what if he was renting a lift ?
Which i see you missed that point also.
welp, got the answer from a local vendor.
Just proving my point there mr. day late, so again, this topic should be made a FAQ
.
Last edited by Supers; May 6, 2011 at 06:58 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
I don't think you know what the hell you are talking about. My post was to you, NOT to the OP.
And people like you are crybabies.
And you haven't contributed anything to this thread, so I fail to see why you chose to post in it. It makes it even worse when i'm sure you know this info right off the top of your head but choose to withhold the information and bitch instead.
Drama queen.
Want to put together a FAQ post? Then make one, and we can stick it at the top of the section. If you aren't willing to do it, then why keep bringing it up?
And people like you are crybabies.
Drama queen.
Want to put together a FAQ post? Then make one, and we can stick it at the top of the section. If you aren't willing to do it, then why keep bringing it up?
