Moser Fab 9 Install Tips?
#1
TECH Enthusiast
Thread Starter
Moser Fab 9 Install Tips?
Getting ready to take the 10 bolt out and install the new rear. Anyone have any tips or tricks that would be helpfull or speed up the process?
#5
Coal Mining Director
iTrader: (17)
Join Date: Nov 2001
Location: Virginia
Posts: 4,442
Likes: 0
Received 0 Likes
on
0 Posts
One tip that will save you some time. Bolt the TA to the rear and torque to spec before you install the rear. I've done it on jack stands and on a lift, having the ta on the rear is nice either way....plus easier to torque it down on the ground.
#6
LS1Tech Sponsor
iTrader: (16)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#7
TECH Enthusiast
Thread Starter
How much fluid does this fab 9 housing need? In my instructions it says approx 4 quarts for a 9inch rear, not a fab 9. Not sure if there is any difference.
Trending Topics
#8
TECH Enthusiast
Thread Starter
Another question... How do you mount the stock sway bar onto the rear end? I have the back brace installed and the 3 inch exhaust clamp method wont work since there is additional material there. Is there a kit to buy for this or how has this been installed before?
#9
LS1Tech Sponsor
iTrader: (16)
Either one will take a little over 3 quarts. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#10
LS1Tech Sponsor
iTrader: (16)
On an M9 with the backbrace the exhaust clamp method won't work. The only way I can see to do it is to use brackets such as these. Bob http://shop.brutespeed.com/Moser-730...Moser-7305.htm
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#11
TECH Enthusiast
Thread Starter
With those brackets that you sell, do those come with the lower part as well that connects to the sway bar? I am trying to reuse the stock sway bar. Thanks
#12
LS1Tech Sponsor
iTrader: (16)
This is the lower part, which would require welding it to the rear. Your stock swaybar then bolts up to it. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website