Moser 9 inch help
#1
Moser 9 inch help
So I'm assembling a moser 9 inch. I tried putting the center section on, and the studs do line up it's just that they are crooked enough so that the center section doesn't go all the way down. I used the washer and nut method to pull the studs through. I tried using a rubber mallet but that did not work. Any suggestions would be awesome.
Thanks
Thanks
Last edited by watabeast; 09-14-2013 at 03:36 PM.
#2
You should be able to coax them straight up by placing a block of wood against them, and hitting the wood with a hammer. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website