Help with 8.8 install
08-08-2004, 09:58 PM
#1
On The Tree
Thread Starter
Join Date: Feb 2004
Location: San Rafael, CA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Help with 8.8 install Help with 8.8 install. The thing is coming tommorow and I have a question
This may sound stupid, but I ordered my 8.8 with the backing plates pressed on and it has bolt in axles. So my question is, how do I get my old E-prake calipers and stuff onto the 8.8? Do I have to slide the axles out? How do I get them off of the 10bolt? I already have the thing out sitting in my driveway. I would assume that I pull the one horrizontal bolt on my Torsen and slide the block out then remove the sensors from the backing plates push in the axles and drop down the C-clips, and pull out the axles. What do I do when it comes to the 8.8, or am I going about this completly the wrong way? Thanks.
This may sound stupid, but I ordered my 8.8 with the backing plates pressed on and it has bolt in axles. So my question is, how do I get my old E-prake calipers and stuff onto the 8.8? Do I have to slide the axles out? How do I get them off of the 10bolt? I already have the thing out sitting in my driveway. I would assume that I pull the one horrizontal bolt on my Torsen and slide the block out then remove the sensors from the backing plates push in the axles and drop down the C-clips, and pull out the axles. What do I do when it comes to the 8.8, or am I going about this completly the wrong way? Thanks.
