Will my rearend hold with this setup???????
11-18-2001, 05:24 PM
#1
TECH Senior Member
Thread Starter
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Will my rearend hold with this setup??????? 16" ET streets...
on my stock 10 bolt with the auburn posi from SLP...(ordered with car)
some of the other mods are in the sig...
I also have a good clutch and would want to come out of the hole at around 4000
on my stock 10 bolt with the auburn posi from SLP...(ordered with car)
some of the other mods are in the sig...
I also have a good clutch and would want to come out of the hole at around 4000
11-18-2001, 07:26 PM
#3
Wheels up Director
iTrader: (11)
Join Date: Nov 2001
Location: Mantua, NJ
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will my rearend hold with this setup??????? I wouldn't think that that would stay together too long if your track hooks. I'm not impressed with the Auburn unit and the 4.10's have a habit of loosing teeth every now and again <img src="images/icons/wink.gif" border="0">
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
11-18-2001, 07:28 PM
#4
TECH Senior Member
Thread Starter
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will my rearend hold with this setup??????? Yea...
With the amount of HP I have and coming out of the hole strong wouldn't do too well
With the amount of HP I have and coming out of the hole strong wouldn't do too well
11-18-2001, 10:50 PM
#5
TECH Resident
Join Date: Nov 2001
Location: Richmond,Va
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will my rearend hold with this setup??????? yeah you'd prolly bust it sooner than later.....i would start saving and invest in a 12 bolt for piece of mind....i'll get a 12 bolt before i start launching real hard on slicks in my car <img src="images/icons/wink.gif" border="0"> ...ohh yeah what kinda cam do you have?? it just says "Cam" in your sig hehe