What Yoke Do I need

Reply Subscribe

Thread Tools

Search this Thread

Jul 16, 2005 | 09:14 AM

ArticZ

Thread Starter

Launching!

Joined: Apr 2004

Posts: 250

Likes: 0

From: Az

What Yoke Do I need

Im buying a Moser 12 bolt from a guy who is running an after market drive shaft. What yoke will I need for my stock drive shaft..

Jul 16, 2005 | 08:00 PM

sixpackmotorsports

Teching In

Joined: Jul 2005

Posts: 34

Likes: 0

From: hesperia, ca

if the yoke is for the same ujoint size you have then it should be fine, just as long as the length of the driveshaft is ok.

Jul 18, 2005 | 07:37 PM

JRick212

On The Tree

iTrader: (6)

Joined: Apr 2005

Posts: 148

Likes: 0

From: The Berlin Turnpike

he's probably setup for the 1350 u-joints so you will need to change your rear u-joint you will need a conversion u-joint 1310 to 1350 I believe. They can be had at most auto parts stores for about 30 bucks.

Last edited by JRick212; Jul 18, 2005 at 07:46 PM.

Jul 18, 2005 | 08:17 PM

chevymec

TECH Fanatic

iTrader: (19)

Joined: Jul 2004

Posts: 1,036

Likes: 34

From: Eastern NC

Im going throught the same delima with my 9". There are 2 different length yokes for them. As for your 12 bolt, like JRick said just get a converson u-joint. The 1350 is alot stronger.

Jul 21, 2005 | 08:53 AM

ArticZ

Thread Starter

Launching!

Joined: Apr 2004

Posts: 250

Likes: 0

From: Az

Great thanks guys

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last