Need Help Please!!!
Thread Starter
Launching!
iTrader: (2)
Joined: Aug 2005
Posts: 243
Likes: 0
From: Lubbock/Tomball, TX
Need Help Please!!! i just ordered these gears last night
http://cgi.ebay.com/ebaymotors/Camar...QQcmdZViewItem
and my friend told me that i may need a spacer for a stock 10 bolt
PLEASE HELP
http://cgi.ebay.com/ebaymotors/Camar...QQcmdZViewItem
and my friend told me that i may need a spacer for a stock 10 bolt
Originally Posted by Dustin
I hope you orderd a spacer too because you should have a 2 series carrier not a 3 series which those gears are for.
Thread Starter
Launching!
iTrader: (2)
Joined: Aug 2005
Posts: 243
Likes: 0
From: Lubbock/Tomball, TX
Originally Posted by Dustin
let me break it down. If you have 2.73 or 3.08 gears you have a 2 series carrier. If you have 3.42 or higher in number you have a 3 series carrier. The gears you bought are 3 series gears which have a thin ring, in order for them to fit in a 2 series carrier you need a spacer, which is about 50 bux from any of our sponsors that sells them or wherever you find it. So either tell them you dont want the gears because you need them for a 2 series carrier or find you a 3 series carrier spacer for a 2 series carrier. Got it?
You can get them from any performance shop that sells ring gear spacers. Tell them you need a spacer for a 2 series 7.5 10 bolt carrier. There out there. Heck even call some sponsors here they may have them.
