4.11's are in!
Thread Starter
11 Second Club
iTrader: (9)
Joined: Nov 2004
Posts: 795
Likes: 2
From: Cincinnati Area
4.11's are in! Got my 4.11's in today and as has been stated many times around here, there doesn't seem to be a dramatic difference as compared to the OEM 3.42's. I haven't had a chance to take it out and nail it yet. Clutch and H/C are next, then a new tune.
I bought a complete rear assembly from another guy and I put the solid spacer on the pinion and a Summit cover. It isn't real noisy, but I do believe it makes a bit more noise than the original gears.
It was a PITA wrestling the housing assembly out and then wrestling the replacement back in. If I hadn't had a lift and a helping hand it would have impossible.
I bought a complete rear assembly from another guy and I put the solid spacer on the pinion and a Summit cover. It isn't real noisy, but I do believe it makes a bit more noise than the original gears.
It was a PITA wrestling the housing assembly out and then wrestling the replacement back in. If I hadn't had a lift and a helping hand it would have impossible.
Originally Posted by staringback05
say bye bye to gas
Thread Starter
11 Second Club
iTrader: (9)
Joined: Nov 2004
Posts: 795
Likes: 2
From: Cincinnati Area
Absolutely, I do expect to see a dramatic difference in performance.
I was just trying to indicate that the car still seems very streetable with the gear change.
I was just trying to indicate that the car still seems very streetable with the gear change.
