relocation brakets on 9in
relocation brakets on 9in Well i was installing the 9in this mroning and found out that the BMR relocation brackets dont line up 
you either can line up the hole for the shock or the 2 for the long bolt tht is for the original lca position . Cant line all 3 holes up at one time i spent an hour trying to make it work lol . Am i doing something wrong ? It was a 1/2 -1in off .
you either can line up the hole for the shock or the 2 for the long bolt tht is for the original lca position . Cant line all 3 holes up at one time i spent an hour trying to make it work lol . Am i doing something wrong ? It was a 1/2 -1in off . Last edited by 2001z; Aug 27, 2006 at 12:54 PM.
Im not sure i had this setup on my 10bolt and it lined up . I just got my 9in from driveline solutions friday and it doesnt seem to line up for some reason to the holes. Maybe scott can chime in and maybe help me out .
Ok thanks gor the info guys !! I guees ill be selling my relocation brackets off the 10bolt then 
I will jsut put the Bmr lcas on till i get some relocation brackets .
I will jsut put the Bmr lcas on till i get some relocation brackets . FWIW relocation brackets are meant to be welded on only, otherwise they won't work. The way I welded my brackets on it would almost be impossible to get them off my 9". Since you are trying to move them from one rear to another they must not have been welded.
Trending Topics
Originally Posted by bigdsz
FWIW relocation brackets are meant to be welded on only, otherwise they won't work. The way I welded my brackets on it would almost be impossible to get them off my 9". Since you are trying to move them from one rear to another they must not have been welded.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
We were able to get my BMR relocation brackets (bolt-on version) to fit on my Moser 9”. The weld on the Moser 9” makes you have to spread the relocation brackets to get them to fit. The contact surface is not as flat compared to the stock 10 bolt. I plan to get mine welded in the future.
When Moser builds there rear ends there tolerances are very loose. Control arm mounts are to wide, Panhard bar mounts to small and shock mounts in to much.. its very common. This why we have to build relocation brackets just for the Moser. Our 10-Bolt brackets will not fit over a Moser control arm mount, a Moser bracket would be way to sloppy on a stock rear end. We do have the Moser 12-Bolt and 9" brackets available in a the link below. Also I do not have a picture of them welded on a 9" available but I do have a picture on a set welded on a Moser 12-Bolt. If anyone has any questions please ask. Thanks! Ryan
www.umiperformance.com/2011.aspx
www.umiperformance.com/2011.aspx