Does the stock torque arm have a bow to it?
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 688
Likes: 2
From: Derby, KS
Does the stock torque arm have a bow to it? Was installing a different rear end in my car over the weekend and noticed that my t/a looks bent (no question its not straight, more like bowed then bent) but that would be almost impossible at my featherweight horsepower level. Do they look bowed from the factory? I've got a wheel hop problem that I'm trying to solve too....
<small>[ July 15, 2002, 08:50 PM: Message edited by: Dave Carney ]</small>
<small>[ July 15, 2002, 08:50 PM: Message edited by: Dave Carney ]</small>
TECH Enthusiast
Joined: Nov 2001
Posts: 543
Likes: 0
From: Richmond, Va
Re: Does the stock torque arm have a bow to it? I dont think mine has a curve to it.. i mean it might have a slight one because of how they form the metal.. but id take it off and lay it on something flat, or check yours against a buddies..
For the wheel hop, get a 1le tranny mount and a prothan torque arm bushing.. good cheap places to start, and it fixed mine.
For the wheel hop, get a 1le tranny mount and a prothan torque arm bushing.. good cheap places to start, and it fixed mine.
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Re: Does the stock torque arm have a bow to it? they should be straight...
mine was slightly bowed when I pulled it out <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
<img src="http://www.wam.umd.edu/~krzew/pretzel.JPG" alt=" - " />
mine was slightly bowed when I pulled it out <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
<img src="http://www.wam.umd.edu/~krzew/pretzel.JPG" alt=" - " />
