3 channel to 4 channel
Thread Starter
TECH Regular
iTrader: (11)
Joined: Mar 2002
Posts: 433
Likes: 0
From: KANSAS CITY, MISSOURI
3 channel to 4 channel My car has traction control (which i'm taking off). I have a 10 bolt that is out of a non traction control car that I' wanting to put in. It already has 3:73's, stud kit, t/a girdle and welded lca relocation brackets not to mention having 30k less miles. What are my options?
Thread Starter
TECH Regular
iTrader: (11)
Joined: Mar 2002
Posts: 433
Likes: 0
From: KANSAS CITY, MISSOURI
My question is about the ABS. Will it work? I can rewire the plug, just don't really want to fry the ABS controller. Or can i just pull the ABS crap off and not worry about it?
You have a 4 channel car and your putting a 3 channel rear in it right? Use teh axles and sensors off the 4 channel rear that is coming out of the car and thats it, just make sure teh hole in the pumpkin for the 3 channel sensor still has teh sensor or plug it with something.
Now if you have a 3 channel car and a 4 channel rear, then you have problems, I had to buy the ABS reluctor ring, locate a sensor and drill the hole for the 3 channel sensor
Now if you have a 3 channel car and a 4 channel rear, then you have problems, I had to buy the ABS reluctor ring, locate a sensor and drill the hole for the 3 channel sensor
