Need some help with my 10 bolt
Thread Starter
Staging Lane
Joined: Nov 2003
Posts: 85
Likes: 0
From: Abilene,TX
Need some help with my 10 bolt I'm not very knowlegeable (sp) when it come to rear ends, but I notice today when I swapped my wheels that I was able to turn the drivers side wheel with it in gear and the e-brake on. This kinda worried me that an axle may be broke or something else. Any help???
I believe that would be the charecteristics of a torsen posi unit. An Auburn which came in earlier 4th gens wouldnt allow it. Also, I doubt your axle coumd be broken because stock 10 bolt axles in 4th gen camaros (or 3rd gen 10 bolts for that matter) have "C" clip axles which, if broken, would just slid right out of the houseing (scary huh?) thats why they make "C" clip eliminators, I would imagine guys who road race probably use them a lot.
although i dont know how it would spin with your e-brake on unless it needs to be adjusted...
although i dont know how it would spin with your e-brake on unless it needs to be adjusted...
Last edited by alamantia; Mar 5, 2007 at 08:06 PM.
Thread Starter
Staging Lane
Joined: Nov 2003
Posts: 85
Likes: 0
From: Abilene,TX
Originally Posted by alamantia
although i dont know how it would spin with your e-brake on unless it needs to be adjusted...
Maybe but I tried the passenger side and I didnt do it I'll try that out.
