Good torque arm for Moser 12 bolt
#1
TECH Senior Member
Thread Starter
Join Date: Sep 2002
Location: Tacoma, WA
Posts: 7,064
Likes: 0
Received 0 Likes
on
0 Posts
Good torque arm for Moser 12 bolt
I would like to get one that bolt's right up to it no problem...but if there isn't one can some one give me some input on yours. like vibrations and clearance. my car is lowered too.
#2
!Dial-up Director
Re: Good torque arm for Moser 12 bolt
I run the Edlebrock T/A with my 12bolt. Fits like stock and only slightly more vibration from the poly front mount.
My friend runs the BMR T/A on his car with his 12bolt.
Clearence was not an issues with either one.
Justin
My friend runs the BMR T/A on his car with his 12bolt.
Clearence was not an issues with either one.
Justin
#3
TECH Resident
Join Date: Jul 2002
Location: Mentor, Ohio
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
I have been reading several posts about some torque arms not mounting up properly to the Moser 12 bolt housing. A few posts I have read were about the Spohn units, any ideas?
#4
TECH Apprentice
Join Date: Nov 2001
Location: Cape Coral,FL
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
Mosier pretty much sucks, they make a 12 bolt that can take abuse but its a pain with alot of other problems and they aint cheap.
I had a problem with my RT arm with my mosier. I had to shorten the bracket on the RT arm that mounts to the pumpkin there. It wasnt a big deal, but it would be if you dont work at a body shop and have the right tools cause theres alot of metal you have to grind/cut one peice which is pretty thick.
I say go with the edelbrock cause its cheap and does the job.
I had a problem with my RT arm with my mosier. I had to shorten the bracket on the RT arm that mounts to the pumpkin there. It wasnt a big deal, but it would be if you dont work at a body shop and have the right tools cause theres alot of metal you have to grind/cut one peice which is pretty thick.
I say go with the edelbrock cause its cheap and does the job.
#5
Launching!
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
I've got a Spohn TQ Arm on my Moser 12 bolt. Shop said no real problems getting it to fit, just a couple of whacks with a rubber mallet to line it up. Lots of vibration but that is because I have the spherical rod bearing setup <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#6
TECH Fanatic
iTrader: (4)
Join Date: Nov 2001
Location: West Palm Beach, Fl
Posts: 1,066
Likes: 0
Received 11 Likes
on
9 Posts
Re: Good torque arm for Moser 12 bolt
I have an LG Motorsports TA. It required a fair amount of grinding to get to fit.
I'm not positive but thought most needed some grinding to fit.
I'm not positive but thought most needed some grinding to fit.
Trending Topics
#8
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
BMR torque arm here and I have had pretty good luck with it.
No clearancing needed. The Random Tech tq arms do need some clearancing on the bracket where it bolts to the rear end.
Jason
No clearancing needed. The Random Tech tq arms do need some clearancing on the bracket where it bolts to the rear end.
Jason
#9
TECH Resident
iTrader: (1)
Join Date: Dec 2001
Location: ArKanSas, LR
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
BMR here with no problems!
EDIT: well i did have one problem. When i first lowered the car BEFORE i got the adjustable PHR it did hit the floorboard/hump between the seats after i got the brace and pulled my rear back straight is fixed it. 12 bolt here also
<small>[ January 29, 2003, 11:19 AM: Message edited by: Tim 98z ]</small>
EDIT: well i did have one problem. When i first lowered the car BEFORE i got the adjustable PHR it did hit the floorboard/hump between the seats after i got the brace and pulled my rear back straight is fixed it. 12 bolt here also
<small>[ January 29, 2003, 11:19 AM: Message edited by: Tim 98z ]</small>
#10
TECH Apprentice
iTrader: (1)
Join Date: May 2002
Location: Cali
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good torque arm for Moser 12 bolt
I've got a Spohn TQ Arm on my Moser 12 bolt. Their is slight vibration, but that is because I have the spherical rod bearing setup. And love it, only problem is those dam 4.10's are loud.
<small>[ January 29, 2003, 06:03 PM: Message edited by: badls1 ]</small>
<small>[ January 29, 2003, 06:03 PM: Message edited by: badls1 ]</small>