Help 9" with stock swaybar ??

Reply Subscribe

Thread Tools

Search this Thread

Aug 11, 2007 | 03:37 PM

yak

Thread Starter

TECH Fanatic

iTrader: (15)

Joined: May 2004

Posts: 1,393

Likes: 3

From: SE Wisco

Help 9" with stock swaybar ??

I have a stock swaybar with new stock endlinks for my 9" I used 3" exhaust clamps like EPP said and coaxed them on. I can't get the endlinks to bolt up, there are not enough threads on the bolt! Do I need a longer bolt? and if so Do I need a longer spacer in between the rubber links. If so haw much does the bolt/ spacer change?

Aug 11, 2007 | 10:08 PM

one2run

11 Second Club

iTrader: (5)

Joined: Jul 2005

Posts: 510

Likes: 0

From: Crestview, FL

I bought a Spohn 1" rear bar. It fits and does not hit the trq arm mounting point on the 9" like my stocker did. Also came with polly bushings and new end links. It looks and works great.
Go to Auto Zone and pick up new endlinks if the stockers you have are to short. That is what I did unitll my new sway bar and endlinks came in.