Possible tranny/tuning problems?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Nov 2001
Posts: 1,655
Likes: 0
From: Killeen, Texas
Possible tranny/tuning problems? I have a 99 TA with a 4l60E. I recently added a VIG 3600 up from a VIG 2800. The car has done this with both converters..
When I am at the track, the car shifts nice and hard from 1-2, then the 2-3 seems to hang on forever.. The car seems to fall out of the power curve before it shifts.. No matter what changes in edit I made, it still shifted at the same spot...
Right now, the car has 3.42's and the shift points are set as follows:
1-2 37 6500
2-3 76 6200
3-4 125 6200
These are the settings from the "Trans Calibrations" tab.
The car was shifting last night at 6500 by the tach and about 88-90mph... WTF am I missing....
ps, TM is deleted, I have a TR 224 cam and rev limit is set at 6800.....
<small>[ March 24, 2003, 08:34 PM: Message edited by: 99taws6 ]</small>
When I am at the track, the car shifts nice and hard from 1-2, then the 2-3 seems to hang on forever.. The car seems to fall out of the power curve before it shifts.. No matter what changes in edit I made, it still shifted at the same spot...
Right now, the car has 3.42's and the shift points are set as follows:
1-2 37 6500
2-3 76 6200
3-4 125 6200
These are the settings from the "Trans Calibrations" tab.
The car was shifting last night at 6500 by the tach and about 88-90mph... WTF am I missing....
ps, TM is deleted, I have a TR 224 cam and rev limit is set at 6800.....
<small>[ March 24, 2003, 08:34 PM: Message edited by: 99taws6 ]</small>
