9" Rear End Installation

Reply Subscribe

Thread Tools

Search this Thread

May 29, 2008 | 12:45 PM

HoytVA

Thread Starter

Staging Lane

Joined: Apr 2006

Posts: 94

Likes: 0

From: San Diego

9" Rear End Installation

Does anybody know where I can find a detailed write-up on how to remove the stock rear end out of a 99 T/A and install a Moser 9"? Thanks

May 29, 2008 | 01:17 PM

M-Ten

TECH Apprentice

iTrader: (2)

Joined: Feb 2008

Posts: 323

Likes: 0

From: St. Pete, FL

go to exoticperformanceplus.com, that's what i followed when installing mine a couple weeks ago... A lot of stuff isn't included in there, but it was a good basic guideline.

May 29, 2008 | 09:04 PM

dpinson

Banned

iTrader: (14)

Joined: Apr 2008

Posts: 129

Likes: 0

From: odessa,texas

one good tip that moser doesnt include in the instructions is the longer axle goes on the passenger side so make sure you put the correct backing plate on that axle before you press the bearing on,and most people and moser say to torque the 3rd member bolts to 35 ft lbs.

other than that it is a really simple install if you got the direct bolt in,took me about 3 to 4 hours for removal and install

May 30, 2008 | 04:42 AM

EPP

FormerVendor

iTrader: (22)

Joined: Mar 2003

Posts: 13,063

Likes: 2

Quote:

Originally Posted by M-Ten

go to exoticperformanceplus.com, that's what i followed when installing mine a couple weeks ago... A lot of stuff isn't included in there, but it was a good basic guideline.

Thanks, I have installation instructions here.
http://www.exoticperformanceplus.com....html?item=145 Bob