please quick answer, 37 teeth and 9 teeth
#1
Teching In
Thread Starter
Join Date: Jan 2007
Location: New Paris Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
please quick answer, 37 teeth and 9 teeth
I just pulled the differential cover off my rearend. 9 teeth on the pinion 37 on the ring gear. What is my ratio? I did the math but do not see that being possible. I did not think that the aftermarket made that ratio for my axle. Please an answer before I put the cover back on.
#3
Teching In
Thread Starter
Join Date: Jan 2007
Location: New Paris Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
That's what I come up with. But who makes a 4:11 for these cars? I found what I think might be a part # 3626 stamped on the ring gear and wrote in white marking pen with the backlash.
#5
Teching In
Thread Starter
Join Date: Jan 2007
Location: New Paris Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I think I figured it out, M G not M C MG= Motive Gear 9 teeth by 37 teeth is their 4:10. The math for some reason comes out to 4:11. I do not know why they call them a 4:10 though. I always wondered why everybody else complained that their M6 bogged out on the highway in 6th gear, mine always cruised along just fine.