Pinion Angle number 223
Pinion Angle number 223 I am sure you have heard this story before. Just installed an adjustable torque arm on a 01 F-body. 9" rear, lowered with Prolines (1 1/4"). I have the rear of the car sitting on blocks under the tires. It is sitting at an angle higher at the rear than the front. I don't have enough blocks to level the car. So, I put the angle finder on the flat sheet metal sub-frame close to the rear end housing. It measures 6 degrees down. I then put it on the base of the torque arm mount and it measures 3 degrees down. I assume that means the rear is pointing up when it should be down? Help!
If you have any questions please take a look at our video. It explains how to set the angle on an f body. If you have any questions please give us a call. We are in the office mon-fri 8:30am-6:00pm est.
http://www.bmrtvonline.com/video_detail.php?mId=3788
http://www.bmrtvonline.com/video_detail.php?mId=3788
