irs in a camaro?
Thread Starter
Teching In
Joined: Jul 2007
Posts: 27
Likes: 0
From: barrie ontario Canada
irs in a camaro? i have a vetter irs section of the suspension sitting in my garage and i happened to blow up the rear in my 97 ss. is it possible to install this irs in my car and if so has anyone done it?
Google it and look around on ffrax.com. Most of the guys here are all about street/strip performance, and have no interest in an IRS conversion, but you can probably find som info there.
Is it a C4, C5, or C6 IRS? C4 shouldn't be that hard to fab in there, but C5 or C6 is a big project since the tranny is mounted to the differential.
It would probably be much easier to pickup a Moser 12 Bolt or 9" rear end for it.
I've seen a C4 IRS put in a 4th gen before, so it is possible, but definitely not a bolt in.
Good luck, if you decide to do it, be sure to let us know how it goes.
Is it a C4, C5, or C6 IRS? C4 shouldn't be that hard to fab in there, but C5 or C6 is a big project since the tranny is mounted to the differential.
It would probably be much easier to pickup a Moser 12 Bolt or 9" rear end for it.
I've seen a C4 IRS put in a 4th gen before, so it is possible, but definitely not a bolt in.
Good luck, if you decide to do it, be sure to let us know how it goes.
TECH Apprentice
Joined: Jul 2003
Posts: 346
Likes: 0
From: Raleigh, NC
Funny you should ask this question, I asked the same one some time ago. Here is the link for your reference:
https://ls1tech.com/forums/showthrea...013&highlight=
https://ls1tech.com/forums/showthrea...013&highlight=
