BlackDuk98

iTrader: (34)

Thank you for any help.

After years of dealing with oil in the intake, multiple pcv routings, single / dual catch cans, both valves etc. I decided to just run a catch can with a breather, and have both valves covers tied into it.

This past summer I was able to look at a new Copo in person and saw that their routing was just off the oil fill cap, and the port off the back of the driver side valve cover. I am doing that now with a modified can and filter that i have, but would like something nicer.

The copo setup looks really nice, including the fittings that attach to each vlave cover, but i cannot seem to find a part number, or a price. The guy heading the factory display didnt have the info either. Anyone know the info? Its even hard to find a picture of one.

Thanks,

Mark jr.

BlackDuk98

iTrader: (34)

This is what I am talking about. The black connections on the valve covers, and the can. These pics were borrowed from DrX on performancetrucks,net

LFSADRG

iTrader: (1)

Hmmm, interesting.

GM PN 19299619 for breather

BlackDuk98

iTrader: (34)

Thank you for the part number. Now is that just for the 2 black valve cover pieces, or the whole setup? I found it for sale at 3 places, but no pics or descriptions of what all is included. If it is the whole setup, that's not bad. If it just the 2 black pieces, then ouch haha

Scoggin Dickey

iTrader: (34)

That is a single breather.

BlackDuk98

iTrader: (34)

Does it have a baffle or check ball? Either way the price for a single black breather is too much. Plus you need 2, not counting the can and filter. I will have to leave that to the deep pocket LS crowd and make my own. Too bad

Thanks for the info

-mark jr.

Motown 454

iTrader: (15)

Holy crap! that's steep!