camshaft position sensor issues
#1
camshaft position sensor issues
First off a couple months ago my ud pulley nearly flew off it was almost completely backed off. I decided to replace it with a stock for the meantime. After putting the stock one on it started right up. The car sat for a week or so and when I went to start it, it took three real long cranks to get it started. A cps(camshaft) code was blown. Changed the sensor and all was good. Two days later back to the same thing hardly starting running like crap. Tryed another new sensor and same thing, worked at first then back to the same. There is a cps code for p0343 still. Before changing the sensor there was a low cps input code and a high, now just that one. The car is a 99 trans am with a forged ls6, cam, headers