Power Estimates...
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Jun 2011
Location: Fairborn, OH
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Power Estimates...
I posted this in the bench racing forum but there doesn't seem to be much activity in there so I wanted to try here. Mods, please feel free to delete this post if you feel so inclined, this is nothing important just looking for guesses on my power output.
I will probably never have my car on a dyno just looking for your best guess or estimate.
LS2 with:
LS3 Injectors
LS3 Intake
LS3 heads milled .030
.041 head gaskets
92mm throttle body
85MM MAF
226/230 .598/.600 111 +4 EPS cam
1 3/4 Long tubes with X pipe dumped at axles
M6 Stock rear.
What do you think I will put to the wheels? Ranges are fine just curious what you think.
Thanks
Matt
I will probably never have my car on a dyno just looking for your best guess or estimate.
LS2 with:
LS3 Injectors
LS3 Intake
LS3 heads milled .030
.041 head gaskets
92mm throttle body
85MM MAF
226/230 .598/.600 111 +4 EPS cam
1 3/4 Long tubes with X pipe dumped at axles
M6 Stock rear.
What do you think I will put to the wheels? Ranges are fine just curious what you think.
Thanks
Matt
#3
Teching In
Thread Starter
iTrader: (4)
Join Date: Jun 2011
Location: Fairborn, OH
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Yes I tune the car myself, on the street and track. I have been tuning for about 6 years now. I just never have been on a dyno. The car is not back together yet, I was runninng SD on E85 before this build and was running out of injector quickly, I am going to stay with E85 but I am going to tune the MAF back in and then do another SD and see what I like better. I have no idea what power was before. I ran a best of 12.5 @ 115 with a 2.15 60ft.