Wiper Problem
09-04-2014, 03:55 PM
#1
Registered User
Thread Starter
Join Date: Sep 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wiper Problem I have an 01 TA and today it was raining so i turned my wipers on and headed home. When i got home, i went to spin the arm it snapped. Now it just spins and will no catch. The turn signals still work as well and the lever for the windsheild washer fluid. My question is, do i have to replace the whole arm?
09-04-2014, 05:45 PM
#2
Registered User
Thread Starter
Join Date: Sep 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
i pulled the lever out, its intact but there is a piece of metal floating around in the hole where the lever goes back in. Do i need to pull the steering column apart to get the wiper switch out?
Last edited by mattpeacock; 09-04-2014 at 07:03 PM.
