tailight issues, any ideas???
Thread Starter
12 Second Club
iTrader: (23)
Joined: May 2007
Posts: 652
Likes: 0
From: San Antonio, TX
tailight issues, any ideas??? So I have a 96 T/A and the pass side bulbs are very dim and go out when I have the running lights on and press on the breaks. The drivers side is very bright and works as it should. The bulb sockets on the drivers side were changed by the previous owner to use a 3057 wedge style bulb. The pass. side is still on the original style round socket 2057 bulb. The lights work good when the running lights are off, of course the pass side is still very dim though.
Also the drivers side blinks at a normal speed but the pass side is reaaallly slow, like an old *** truck. lol
Also the drivers side blinks at a normal speed but the pass side is reaaallly slow, like an old *** truck. lol
Thread Starter
12 Second Club
iTrader: (23)
Joined: May 2007
Posts: 652
Likes: 0
From: San Antonio, TX
I tried that and they were just as dim and acted the same. I even tried jumping a wire from the drivers side to the pass side and they acted the same. I'm thinking its b/c of the turn signal relay.
