No Tach or Temp Gauge
#1
TECH Enthusiast
Thread Starter
iTrader: (15)
Join Date: Nov 2006
Location: Jax, FLA
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
No Tach or Temp Gauge
Hey Guys,
SO, yah I have a 99z28 collaboration.
2000 PCM/Engine Harness, 01 Z28 underhood harness with a 2000 V6 interior harness,Dash,etc) 2001 Gauge Cluster
Well since I finally put frankenstein together and got her running. Now my RPM and Water Temp gauge are Inop.
I am using a 2001 Gauge Cluster
Any tips/hints or tricks?
BTW, I don't have a good connection on my engine to body ground (didn't think it would matter)
Also, I hear those 4 wires in the back of the drivers side head may be the issue??
SO, yah I have a 99z28 collaboration.
2000 PCM/Engine Harness, 01 Z28 underhood harness with a 2000 V6 interior harness,Dash,etc) 2001 Gauge Cluster
Well since I finally put frankenstein together and got her running. Now my RPM and Water Temp gauge are Inop.
I am using a 2001 Gauge Cluster
Any tips/hints or tricks?
BTW, I don't have a good connection on my engine to body ground (didn't think it would matter)
Also, I hear those 4 wires in the back of the drivers side head may be the issue??
#2
Sounds like a ground issue to me. I had a problem 2 weeks ago with te temp guage. cleaned some grounds and then it started working. Im not sure which ground it was. I have a feeling it was the wide flat exposed cooper wire that comes out b/w the power steering and alternator and grounds on the driver side fender behind the radiator.