random misfire code
#1
Teching In
Thread Starter
Join Date: Jun 2010
Location: Hawaii
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
random misfire code
so i have an 02 formula i recently changed out my exhaust manifolds to bbk shorty headers and high flow cats....well had a misfire in the 6th cylinder car was idling rough so i popped off the coil pack cleaned it and runs fine but now its showing that i have a random misfire now anyone might know what it could be (also service engine light flashes)
#4
Teching In
Thread Starter
Join Date: Jun 2010
Location: Hawaii
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
yeah i think it might be the coil pack but i just cleaned off the electric connector and it didnt show the 6th cylinder misfiring it just gave the random misfire but im going to change out that coil pack and see what it does
#5
TECH Resident
iTrader: (3)
Join Date: Mar 2008
Location: Joliet Illinois
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
Do you have a scan tool? If so you can loom at misfire counts and see if it is still doing it. If you do not have a scan tool unplug you battary for awile and see if the code comes back it could just be a result of the coil you cleaned if 6 was misfiring and you fixed that it could have saved the random code misfire code. Did you every have p0306 and p0300 at the same time?
#6
Teching In
Thread Starter
Join Date: Jun 2010
Location: Hawaii
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
at first it was a p0306 now its just a p0300 code ive erased it and it popped back up again so im going to check my vac lines and seals and ive already ordered a new coil pack to replace that one so we'll see how it goes from there