Flashed HIDs and lost the ignition relay?
#1
Flashed HIDs and lost the ignition relay?
So last night had to flash my hi beams at some drunk barreling down at me.
I have 50watt hid kit in my low beams.
This morning car didn't want to start so i did the usual checking fuses.
I unpluged/ pluged the ignition fuse and swapped the igniiton relay with ac relay.
The car fired up.
My hid kit doesn't have a relay, i just wired it to stock wiring harness.
Could the HIDs have caused this or was the relay just on its death bed?
I have 50watt hid kit in my low beams.
This morning car didn't want to start so i did the usual checking fuses.
I unpluged/ pluged the ignition fuse and swapped the igniiton relay with ac relay.
The car fired up.
My hid kit doesn't have a relay, i just wired it to stock wiring harness.
Could the HIDs have caused this or was the relay just on its death bed?
#2
Launching!
iTrader: (4)
Join Date: Feb 2010
Location: Tucson, AZ
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Could be either. What I would suggest doing though is wiring up the high beams so that your lows stay on along with the highs.
https://ls1tech.com/forums/stereo-el...same-time.html
https://ls1tech.com/forums/stereo-el...same-time.html