crank no start please help
Thread Starter
Teching In
Joined: Aug 2010
Posts: 6
Likes: 0
From: mass
crank no start please help I have a 2000 trans am I jus put a bunch of mods and now it won't start its crankin thow I put a cam double roll an oil pump push rods rollers fast intake tb feul rail inj headers y pipe and an under drive and tsp maf. I have fuel pressure in my rail and I have spark but inj are not pulsing. Does anyone have any suggestions on what to do I'm dieing to drive this thing?
Sorry also did an evap delete
Sorry also did an evap delete
Check all ECU fuses. Check all electrical connection. Unplug them and plug them back in to make sure they are seated. Do you know anyone with a hand held scanner? Hope you get it figured out.
Thread Starter
Teching In
Joined: Aug 2010
Posts: 6
Likes: 0
From: mass
Thanx bro I do have a scanner I'm in the middle of doin the cam sensor now I should have it done tonight when I get home from work I jus got the part I will update post as soon as I finish up tonight hopefully with good news. Thanx for ur input
