Flashers that dont flash.
#1
Teching In
Thread Starter
Join Date: Jun 2012
Location: Greensboro NC
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've had the car for less than a week and its my first car, so go easy on me. But when i hit the turn signal in either direction the light comes on on the dash that says i have hit it, and the lights come on in the rear. but just the rear lights come on and they stay solid. i went and got a flasher relay sensor (what i thought might have been the problem) and i have read every forum on the subject and they all say its under the dash right by where your right knee would be. i have taken out all the panels under the steering wheel and gotten under there with a flashlight twice and still don't see it. I even checked under the hood and none of the fuses there or on the side of the dash matched up with the one i have which I'm pretty sure is the right part for a 2000 z28. i know a pic would help to identify the part but tbh my phone is so old you probably couldn't make sense of the picture. any suggestions anyone?
and i live in NC so i have to pass inspection. otherwise i could care less but to keep it on the street i gotta get this fixed.
and i live in NC so i have to pass inspection. otherwise i could care less but to keep it on the street i gotta get this fixed.
#4
Teching In
Thread Starter
Join Date: Jun 2012
Location: Greensboro NC
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
alright thanks guys! i know the front bulbs needed to be replaced i just didnt think that not flashing was to let you know. I'm use to a really fast click, that's what is is for the tundra.(what i'v been in the last few months) And wow i must have really screwed up buying that part, according to the diagram i went out and got a hazard flasher. it was only like 6 bucks anyhow i guess ill have an extra one laying around. but thanks again the info is appreciated!