AC line torque specs???
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's a German-based torque setting:
"Goodentight".
Seriously, my 96 service manual has a range; different torques for different liines, from 13 ft/lbs to 62 ft/lbs, so which line specifically?
"Goodentight".
Seriously, my 96 service manual has a range; different torques for different liines, from 13 ft/lbs to 62 ft/lbs, so which line specifically?
#4
TECH Enthusiast
Thread Starter
iTrader: (18)
Join Date: Nov 2004
Location: Salado, TX
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's the line that runs from the condenser to the evaporator and it's leaking where it seals up to the evaporator. I've tried both the regular green o-rings and the metal/black rubber o-rings. No matter how much I torque them down they continue to leak and I don't want to go past "gutentight." So I'm guessing either the flange surfaces of the evaporator or the line are messed up, and the line is the easiest to replace, so that'll be the next thing that gets replaced.