T/A Medic

iTrader: (1)

Long time ago I took all the wiring out of the car... ( Drag Car )

I've realized that not having the ability to operate my windows is fail sauce...

Need some help with wiring.

I've looked through multiple posts but wiring diagrams are giving me issues...

I have a new AC Delco Connector for the driver window switch... and a new connectors for the power window motors.

How do I go about hooking all this up... No express down mod.

Wires Go Where?

TYIA

A - Ground ?
B - Window Motor Wire 1 ? - Pass Side
C - Window Motor Wire 2 ? - Pass Side
D - Window Motor Wire 1 ? - Driver Side
E - Window Motor Wire 2 ? - Driver Side
F - 12v Power - 30amp Inline Fuse ?

if window goes in wrong direction when activating the switch i would just switch D/E and B/C

T/A Medic

iTrader: (1)

This setup works... If your windows don't go up or down with switch direction properly, just swap wires to the motor.