General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Where does this connector go?

Thread Tools
 
Search this Thread
 
Old 07-28-2012, 10:05 PM
  #1  
Teching In
Thread Starter
 
dtws6's Avatar
 
Join Date: May 2012
Location: O'Fallon IL
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Where does this connector go?

I am trying to get my car back together. This is the only wire I didn't label and sure enough I have no idea where it goes. It is on the same strand as the driver side rear O2 sensor connector. Any help is appreciated. Its an m6 01 t/a by the way.
Attached Thumbnails Where does this connector go?-dsc_0107-1.jpg  
Old 07-28-2012, 10:29 PM
  #2  
TECH Addict
iTrader: (36)
 
mjs1012's Avatar
 
Join Date: Mar 2011
Location: Stratford, CT
Posts: 2,687
Received 19 Likes on 16 Posts

Default

If its by the rear o2 then it's more than likely for the transmission. I don't have an m6 but I'm sure the wiring set ups arent much different.
Old 07-28-2012, 10:51 PM
  #3  
Teching In
Thread Starter
 
dtws6's Avatar
 
Join Date: May 2012
Location: O'Fallon IL
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

I'll look at it tomorrow but it doesn't go very far past the bell housing. The connectors on that side of the trans are about mid way down the trans. Maybe I have it routed wrong or slack is caught up somewhere.
Old 07-28-2012, 11:35 PM
  #4  
TECH Enthusiast
iTrader: (11)
 
JaYZeig's Avatar
 
Join Date: Apr 2010
Location: plainfield, il
Posts: 599
Likes: 0
Received 1 Like on 1 Post
Default

its the connector for your reverse lamps switch on the passenger side of the transmission. hope this helps man!
Old 08-05-2012, 02:19 AM
  #5  
Teching In
Thread Starter
 
dtws6's Avatar
 
Join Date: May 2012
Location: O'Fallon IL
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

That was it, thanks!




All times are GMT -5. The time now is 05:15 PM.