PCV valve relocation link needed or advice!
Thread Starter
On The Tree
Joined: Sep 2012
Posts: 105
Likes: 0
From: cape.cod mass
PCV valve relocation link needed or advice! i recently replaced the pcv on the 99 z28 and of course, the pcv valve and the hose was filled with oil, and then the hose to the intake manifold broke. i saw a thread or link on here showing how to adapt a pcv valve with a 90 degree end on it for use on a ls1. i just want to fix my rigged electrical taped straight pcv valve with 3//8" hose setup.
does anyone know a link or thread showing the parts i need and how to adapt a pcv valve that is vertical instead of inline (the link i found had a description, but the parts needed was mysteriously deleted.) any suggestion
does anyone know a link or thread showing the parts i need and how to adapt a pcv valve that is vertical instead of inline (the link i found had a description, but the parts needed was mysteriously deleted.) any suggestion
Teching In
Joined: Oct 2012
Posts: 1
Likes: 0
From: Phoenix, AZ
I know this isnt what you're looking for exactly, but food for thought:
http://www.ls1.com/forums/f6/pcv-val...ication-80151/
http://www.ls1.com/forums/f6/pcv-val...ication-80151/
